Please read these instructions completely once before beginning.

NOTE!!  You do not need to install these new drivers if all is working OK.  Only install them if you are running the new 64 bit or VISTA Operating Systems or for some reason need to re-install the drivers.

PROCEDURE:

1. Download this file GCP-SecurityDeviceDrivers-2008.zip

2. Unzip this file and place the program contained in the file on your Windows desktop. 
The program will be named Install.exe

3. Unplug the General CADD Security Device if plugged in.  Very Important!

4. Run the program Install.exe

5. You will see a window appear that looks like this:

Check the checkbox labeled USB Dongle as shown above then click the Begin Install button.


The installer will automatically install the drivers. 

When finished, this dialog will appear:

6. Click the Close button

7. Now, plug in the USB security device. Windows will proceed to locate the driver files and install them. Wait for Windows to tell you that it has found a new hardware device and that the device is now ready to be used.  Do not allow the Windows driver wizard to search the internet for a new driver.  You already have it and just loaded it onto your computer.

This procedure should take about one minute depending on the speed of your machine and the number of programs running.

Now, launch General CADD Pro. The Demo Mode message should no longer appear.

Let us know by email if you have any trouble or questions  contact@generalcadd.com